Beauty chair 557A with trays black

Sale price719,00 zł Regular price829,00 zł
Lowest price in the last 30 days: 719,00 zł PLN

In stock

Get notified when back in stock

557A black beauty chair with trays

A chair without a drive system, with a fixed height of 76 cm—there is no actuator that could fail. Beneath the seat are two pull-out trays for tools and products. The backrest and footrest use ratchet adjustment, and the chair unfolds to 184 cm.

557A black beauty chair with trays

Key features

  • Fixed seat height of 76 cm, non-adjustable
  • Two pull-out plastic trays under the seat
  • Backrest and footrest with independent ratchet adjustment
  • Face opening in the headrest, covered with a cushion
  • Armrests split in the middle, movable and removable
  • Length when unfolded: 184 cm
  • Metal frame in the upholstery color
  • Black synthetic leather upholstery
  • Seat 51 × 60 cm, 10 cm foam thickness

Two trays under the seat

They slide out one above the other. Tools and products used during the treatment stay within reach instead of on a table across the workstation. The set is 31 cm wide and fits under the seat without protruding beyond the chair’s outline.

Extended trays under the seat of the 557A black chair

Removable plastic trays

Wash them under running water. The tray pulls completely out of its runners, so after a day of work it can go into the sink or be disinfected together with the tools. The smooth plastic does not absorb products.

Plastic tray of the 557A black chair

Fixed seat height of 76 cm

No actuator, pump, or electricity. At 76 cm, the seat height is suited to working while seated on a beauty stool. Nothing here can leak or stop holding its position.

557A black chair, front view

Backrest and footrest with ratchet adjustment

A metal comb with a dozen or so positions. Raise the section to the desired position and release it—the mechanism holds it without tightening. The comb is finely spaced, so the difference between adjacent positions is just a few degrees.

Ratchet mechanism in the 557A black chair

Release lever by the frame

Lower the section with one hand. The lever is positioned on the side, at frame height, so you can reach it while standing next to the chair. No electronics and no remote control to search for.

Release lever on the 557A black chair

From a seated position to a treatment bed

The backrest lowers to a horizontal position. In the seated position, the chair is suitable for facial and eyebrow treatments; when unfolded, it can be used for massages or body treatments. You can adjust the backrest and footrest angles independently.

Adjustment range of the 557A black chair

Unfolds to 184 cm

The backrest, seat, and footrest form one straight line. At 184 cm, it is suitable even for taller clients. The seat has 10 cm of foam, and the sections meet without a step.

557A black chair unfolded flat

Face opening in the headrest

Cut all the way through. During a back massage, the client places their face in the opening instead of turning their neck. Their face does not rest against the bottom, so there is no mark on the forehead after an hour.

Face hole in the headrest of the black 557A chair

Cushion covers the hole

Contoured and placed on top. For facial treatments, put the cushion in place and the headrest becomes smooth. It measures 56 x 24 cm and is included.

Headrest cushion of the black 557A chair

Armrests split in the middle

They align when the backrest angle changes. The split design prevents the armrest from blocking the reclining backrest—both parts move relative to each other. They can also be removed completely.

Armrest joint of the black 557A chair

Black metal frame

The frame is the same color as the upholstery. It does not stand out because it blends into the seat—the chair reads as a single solid form. The tube is bent, with no sharp edges near the client's legs.

Frame of the black 557A chair

Upholstery stitching

Horizontal stitching divides the surface into sections. The seams run along the sections, so the upholstery does not wrinkle when the backrest angle changes.

Upholstery stitching of the black 557A chair

Synthetic leather upholstery

Washable and moisture-resistant. It does not absorb water, and alcohol-free products are suitable for disinfection.

Upholstery of the black 557A chair

Who it is for

For workstations where tools need to be within easy reach without a separate table. The trays slide out from the sides of the chair and can be removed for disinfection together with their contents.

Other versions of this piece of furniture

The same model, other versions: white.

FAQ

Does the chair have height adjustment?
No. The seat height is fixed at 76 cm.

How many trays are under the seat?
Two, pull-out trays that can be completely removed for washing.

To what length does the chair recline?
Up to 184 cm.

How are the backrest and footrest adjusted?
With a metal-toothed ratchet, independently. The chair does not require a power supply.

Does the headrest have a face hole?
Yes, cut all the way through and covered with a contoured cushion.

What should be used to disinfect the upholstery?
Use alcohol-free products without strong detergents. Alcohol-based products and cleaners such as Cif remove the protective layer from synthetic leather, causing the material to become dull and lose its flexibility.

Technical data

Type: non-powered, fixed height
Upholstery color: black
Frame: metal, black shades
Upholstery material: synthetic leather
Seat filling: foam
Seat height: 76 cm, fixed
Length when fully reclined: 184 cm
Headrest cushion: 56 x 24 cm, with a face hole in the headrest
Backrest: 70 cm long
Seat: 51 x 60 cm, 10 cm thick
Footrest: 60 x 61 cm
Armrests: 40 x 40 cm, split, movable, removable
Trays: 2, set width 31 cm
Warranty: 12 months

Dimensional drawing of the black 557A chair

The product color shown in the photos may differ slightly from the actual color due to monitor settings and lighting conditions.