Electric pedicure beauty chair Azzurro 706 1 motor white

White Azzurro 706 electric pedicure beauty chair, 1 motor

One actuator raises the seat from 63 to 85 cm, while the backrest, footrest, and cradle are adjusted manually. The footrest is split—each leg can be positioned separately, which is important in podiatry when treating one foot. Power: 50 W.

Key features

• One electric actuator, controlled with a wired remote
• Seat height from 63 to 85 cm
• Split footrest, each section guided separately
• Cradle function, meaning the entire chair tilts
• Backrest from upright to horizontal, released with a lever
• Headrest with face opening and plug
• Armrests raised when getting into the chair
• 90 × 50 cm base with leveling feet
• Synthetic leather upholstery, foam seat
• Power: 50 W

One actuator, height from 63 to 85 cm

22 cm of adjustment controlled with one button. At 63 cm, the client can sit down without a step, while at 85 cm, the foot reaches the hand height of someone sitting on a stool. The motor controls height only—it is the only adjustment that cannot be set manually.

Two-button remote control

An up arrow and a down arrow, nothing more. The remote hangs from a spiral cable and can be placed on the frame beneath the seat. Two buttons mean there is no need to learn complicated operation, and an accidental press will not change the backrest or footrest position.

Split footrest, each leg separately

Two sections that slide apart sideways. In podiatry, one foot is treated at a time. Separating the sections opens access from the inside, while the other leg remains supported the entire time instead of dangling beside the chair.

The footrest sections measure 34 and 16 cm

34 cm for the calf, 16 for the foot. The lower section tilts separately, so the foot can be positioned lower than the calf—the available adjustment is 15 cm. The section is 28 cm wide at the knee and 27 cm at the foot.

The cradle tilts the entire chair

The seat, backrest, and footrest move together. Instead of reclining just the backrest, you tilt the entire chair. The angle between the torso and thighs remains unchanged, so the client does not slide down the seat during a longer treatment.

Folds flat

The backrest, seat, and footrest form one continuous line. After sliding the footrest section in, the chair becomes a flat surface for working on the back or for a full-body treatment. The armrests then lower below the seat line.

Seated position for facial treatments

The backrest is upright and the footrest horizontal. This position is used for consultations, eyebrow styling, or permanent makeup. The client sits normally, with their legs supported at seat height.

Semi-reclined position for pedicures

The backrest is reclined and the footrest lowered. This is the most common position in a podiatry office: the feet are lowered and extend beyond the chair's outline, so the podiatrist can sit in front of them without leaning over the client's knees.

Levers on the left side of the base

Chrome-plated, with a rubberized grip. The levers release the locks of the manually adjusted mechanisms. You can reach them while standing beside the chair, without bending under the frame.

Headrest with adjustment knob

Lock the angle with a single knob. The headrest slides on a shaft, while the knob on the side holds it in the selected position. The adjustment range is 20 cm, measured at the end of the cushion.

Face opening under the cover

The cover is press-fitted. When working on the back, you remove the cover and the client rests their face in the opening. For every other treatment, the headrest is smooth and there is no trace of the opening.

Armrests raised when getting into the chair

Raising the armrest opens the side of the chair. This is useful for clients who have difficulty getting their legs over the side. In the reclined position, the armrests lower below the seat and stay out of the way.

Seat and footrest without a step

The sections meet without a noticeable gap. After sliding the footrest section in, the joint does not press into the thighs. This matters during treatments in which the client lies down for more than fifteen minutes.

Stitching and synthetic leather

Horizontal stitching divides the backrest into three sections. The synthetic leather upholstery in shades of white is moisture-resistant and can be wiped with an alcohol-free product.

Who is it for

For foot treatments where each leg is positioned separately. The footrest is split, allowing you to access the foot from the outside instead of working over the other leg.

Other versions of this piece of furniture

The same model, other versions: black.

FAQ

How many actuators does the Azzurro 706 chair have?
One—it is responsible for the seat height. The backrest, footrest, and rocking function are adjusted manually.

Is the footrest really split?
Yes. They are two separate sections that slide apart sideways and recline independently of each other.

How high does the seat rise?
From 63 to 85 cm.

Does the chair recline flat?
Yes. The backrest, seat, and retracted footrest sections form one flat surface.

How does the rocking function work?
The entire chair frame tilts, not just the backrest, so the angle between the torso and thighs remains unchanged.

What should be used to disinfect the upholstery?
With alcohol-free products and without strong detergents. Alcohol-based products and products such as Cif remove the protective layer from synthetic leather, causing the material to become dull and lose its elasticity.

Technical data

Type: electric
Number of actuators: 1 (height)
Controls: wired remote control, other adjustments are manual
Upholstery color: shades of white
Upholstery material: synthetic leather
Seat filling: foam
Seat height: min. 63 cm, max. 85 cm
Headrest: 35 x 26 cm, tilts by up to 20 cm
Backrest: 58 cm wide, 55 cm long
Seat: 59 cm
Footrest: split, sections 34 and 16 cm, widths 28 and 27 cm, lowers by up to 15 cm
Base: 90 x 50 cm
Power: 50 W
Voltage: 220–240 V
The set includes: chair, wired remote control, power adapter, face-hole cover
Warranty: 24 months

The product color in the photos may differ slightly from the actual color due to monitor settings and lighting conditions.