Azzurro 708A electric beauty chair 4 motors gray

Azzurro 708A 4-motor grey electric beauty chair

Four actuators controlled by a remote: height, backrest, footrest and cradle. The seat moves from 62 to 92 cm, the load capacity is 140 kg, and the chair itself weighs 70 kg. Grey upholstery on a white base; width including the armrests: 88 cm.

Key features

• Four actuators: height, backrest, footrest and cradle
• Seat height from 62 to 92 cm
• Load capacity: 140 kg; chair weight: 70 kg
• Extendable footrest on a telescopic arm
• Headrest with a face opening concealed under a cover
• Width with armrests: 88 cm; seat width: 62 cm
• Headrest width: 39 cm
• Grey synthetic leather upholstery, white base
• Power: 135 W, power supply: 220–240 V

Four actuators and a wired remote

Height, backrest, footrest and cradle—each has its own button. The movement is smooth and stops at any point within the range, so you can select the position precisely rather than in increments. The remote is wired, so it does not need batteries and will not lose connection during treatment.

Seat height from 62 to 92 cm

At 92 cm, it is higher than most beauty chairs can go. The upper limit matters for treatments performed standing up or leaning over the treatment area—for feet, permanent makeup and work with a magnifying lamp. The 32 cm range lets you set the chair to suit you once and avoid adjusting the stool for every client.

At 62 cm, the client can get on without climbing

At 62 cm, the height is easy to get onto without effort. An older person or someone with limited mobility can sit down normally, and you can then raise the chair to the working position. This is simpler and safer than asking someone to climb onto a seat set high up.

Reclines into a lounger position

The backrest, seat and footrest form one continuous surface without a step. At over 200 cm, it is long enough even for tall people, and nothing presses into the back at the joins between the segments. In this position, the chair is suitable for body treatments and massages, not just facial work.

Rocking function as the fourth actuator

It tilts the entire structure as a single plane—the head moves downward while the legs move upward. This is not reclining the backrest. The backrest, seat, and footrest remain in the same position relative to one another, while everything tilts at once—you can see this in the photo from the angle of the seat and the footrest, which is clearly higher than the headrest. This is useful for facial and neck treatments when you want the head to be lower than the torso.

Telescopic extendable footrest

The footrest moves away from the seat on arms instead of merely changing its angle. For a person 190 cm tall, the calves are supported along their entire length rather than hanging over the edge. For a shorter person, you slide the footrest under the seat, and the chair takes up less space. The adjustment takes one second and requires no tools.

The footrest is divided into two segments

The edge between them is flat, with no step. When unfolded, the segments form a continuous surface, so nothing presses against the calves. When folded, the footrest retracts under the seat and does not protrude into the passageway.

Headrest with a face opening

The opening is cut into the headrest itself and covered with a flush-fitting cap. On a daily basis, the chair looks like a regular beauty chair, with no trace of a function you are not currently using. When you need to position a client face down—for a back massage or a neck treatment—you remove the cap. The headrest is 39 cm wide and adjustable, so you can adapt it to the client's height.

Gray upholstery on a white base

The darker upholstery hides marks less visibly than white. With treatments involving oils, pigments, or wax, this makes a real difference to how the chair looks after six months. The base and column remain white, so the overall design does not look visually heavy—in the white version, everything is bright.

How much space does it take up in the treatment room?

88 cm wide with the armrests and over 200 cm long when reclined. Most of the space is needed at the front and back—allow extra space for the extending footrest if you plan to use it. The chair weighs 70 kg, so two people are needed to move it.

Who is it for?

For treatments during which you adjust the client's position several times during a single appointment. You control the motors with a remote, so changing the settings does not interrupt your work.

Other versions of this piece of furniture

The same model, other versions: white with heating, gray with heating, white.

FAQ

What height can the seat be raised to?
From 62 to 92 cm, continuously adjustable and controlled by remote control.

What is the load capacity?
140 kg.

What does the fourth actuator control?
The rocking function, meaning tilting the entire chair.

Is the chair suitable for back treatments?
Yes. There is a face opening in the headrest hidden under a cover.

How much does the chair weigh?
70 kg.

What should be used to disinfect the upholstery?
With alcohol-free products and without harsh detergents. Alcohol-based products and Cif-type cleaners remove the protective layer from eco-leather, causing the material to become dull and lose its elasticity.

Technical data

Type: electric
Number of actuators: 4 (height, backrest, footrest, rocking function)
Control: wired remote control
Upholstery color: shades of gray
Base color: shades of white
Upholstery material: synthetic leather
Seat filling: foam
Seat height: min. 62 cm, max. 92 cm
Length when reclined: over 200 cm
Width with armrests: 88 cm
Seat width: 62 cm
Headrest width: 39 cm
Footrest: extends on telescopic arms
Load capacity: 140 kg
Chair weight: 70 kg
Power: 135 W
Voltage: 220–240 V
The set includes: chair, wired remote control, headrest
Warranty: 24 months

The product color in the photos may differ slightly from the actual color due to monitor settings and lighting conditions.