Sillon v2 210 Hydraulic Beauty Chair White

Sillon v2 210 white hydraulic beauty chair

A chair with no electricity: raise the height using the foot pump with a range of 62–75 cm, and adjust the backrest and leg rest angles with levers. It rotates a full 360 degrees and reclines into a flat surface measuring 184 cm in length.

Key features

• Hydraulic drive, no power supply or cable required
• Seat height from 62 to 75 cm, adjusted with a foot pump
• Full 360-degree rotation with position lock
• Length when fully reclined: 184 cm
• Continuous adjustment of the backrest and leg rest angles with levers
• Face opening hidden under the 54 x 25 cm headrest cushion
• Armrests split in the middle, movable, and removable
• Base: 106 x 57 cm
• Semi-matt synthetic leather in cool white shades

Height from 62 to 75 cm, adjusted with your foot

A foot pump means you do not have to put down your tools to change the height. Press the lever with your foot and the chair rises while your hands remain with the client. With an electric chair, you have to reach for the remote; with a hydraulic chair, this step is unnecessary. The 13 cm adjustment range is sufficient for working comfortably both standing and sitting.

Full rotation

The chair rotates around the column and locks in the selected position. During a facial treatment, you can turn the client away from the wall; during a manicure, you can turn them sideways toward the table, without moving the entire piece of furniture. The actuator has a built-in locking system, so the chair stays in position once set.

Backrest adjusted continuously with a lever

Continuous adjustment means you can stop the backrest exactly where you want it. There are no notches or preset positions to line up with. Release the lever, set the angle by hand, and let go. The backrest itself is 74 cm long, supporting the entire back even when reclined.

The leg rest has its own lever

You can set the leg rest angle independently of the backrest. During a facial treatment, the legs can remain raised even when the backrest is only slightly reclined. When working on the feet, you lower just the leg rest and sit in front of the chair without changing the rest of the setup. The section is 60 cm wide and 54 cm long.

Reclines to 184 cm

The backrest, seat, and leg rest form one flat surface. This provides a full working area for treatments performed lying down, such as massages, body treatments, or waxing. At 184 cm, it accommodates most people, and the transitions between the sections are flat, so nothing presses into the back.

Headrest cushion

The cushion is contoured and included. At 54 cm wide, it is wider than the headrest itself, so the head is supported even when turned to the side. The cover is made of the same material as the rest of the chair, so it can be cleaned in the same way.

Face opening under the cushion

After removing the cushion, a ready-made face opening is revealed in the headrest. This turns the beauty chair into a workstation for treatments performed with the client lying on their stomach—massage of the back, neck, and shoulders. The cushion covers the opening during everyday use, so the chair looks like a regular beauty chair. The same solution is used in the Sillon Classic series.

Armrests split in the middle

Each armrest consists of two sections connected by a joint. This allows them to move together with the backrest: when you recline them, the armrest does not stick out at an angle but follows the line of the body. Chairs with one-piece armrests have a step between the sections when fully reclined.

The armrests can be removed

Removal is simple and requires no tools. Without the armrests, a flat surface remains with the seat width of 62 cm—comfortable for massage and treatments where you need to approach the client from the side. The armrests themselves are 40 cm long each.

Foam seat

The 10 cm of foam is a thickness you can feel during a longer treatment. The 62 × 60 cm surface also provides room for someone with wider hips. The foam has the right firmness—it does not collapse under weight, so the body does not sink into a single point after half an hour of lying down.

Semi-matte imitation leather in cool white

The semi-matte finish does not reflect the lamp light like a lacquered finish. The supplier describes this shade as cool white, without a yellow or cream undertone. The material is moisture-resistant and easy to clean, which in a treatment room simply means wiping it after every client without leaving streaks. The texture has a subtle grain, so it does not slip under the body.

Contoured upholstery

The stitching runs along the edges and gives the seat its shape. It is not merely decorative—it keeps the foam contoured, so the seat does not become flat after a few months. The center of the surface remains smooth, without seams that could press into the back.

Backrest

The headrest is part of the backrest, not a separate section on rods. Therefore, there is no gap between the back and the head where the neck could fall. This makes the construction simpler and less prone to looseness than chairs with an extendable headrest, but it also cannot be lengthened for a very tall person.

Chair base

The rectangular frame lies flat on the floor on four adjustable feet. The feet level it on uneven floors—for a rotating piece of furniture, it is worth adjusting them immediately during assembly.

How much space does it take up in the treatment room?

The base measures 106 x 57 cm, but when reclined the chair is 184 cm long.

Who is it for?

For a treatment room where there is no free outlet near the workstation or you do not want a cable running across the floor. The height is adjusted with a foot pump, so both hands remain free to attend to the client.

Other versions of this piece of furniture

The same model, other versions: grey-brown, beige, black.

FAQ

Does the chair require a power connection?
No. The height is adjusted by a foot-operated hydraulic pump, while the angles are set with levers.

What height does the seat adjust to?
From 62 to 75 cm.

How far does the chair recline?
Up to 184 cm when fully reclined.

Is this the same shade as the version described as cold white?
Yes. The supplier specifies the upholstery color for this code as shades of cool white.

Is the chair suitable for back treatments?
Yes. There is a face hole under the headrest cushion, and the armrests can be removed.

What is included in the set?
Seat with backrest and footrest, a complete set of armrests, face-hole cushion, base components with hydraulic pump, and assembly kit.

What should be used to disinfect the upholstery?
Alcohol-free products without strong detergents. Alcohol-based products and Cif-type cleaners remove the protective layer from eco-leather, causing the material to become dull and lose its flexibility.

Technical data

Type: hydraulic
Number of hydraulic pumps: 1
Controls: foot pump (height), levers (backrest and footrest angles)
Upholstery color: shades of cool white
Frame color: shades of white
Upholstery material: synthetic leather, semi-matte
Seat filling: foam
Length when fully reclined: 184 cm
Seat height: min. 62 cm, max. 75 cm
Base: 106 x 57 cm
Seat: 62 x 60 cm, thickness 10 cm
Backrest: 74 cm
Footrest: 60 x 54 cm
Armrests: 40 cm, split in the middle, movable, removable
Headrest cushion: 54 x 25 cm
Rotation: 360 degrees, with lock
The set includes: seat with backrest and footrest, a complete set of armrests, face-hole cushion, base components with hydraulic pump, assembly kit
Warranty: 12 months

The product color in the photos may differ slightly from the actual color due to monitor settings and lighting conditions.