Electric beauty chair Azzurro 803D 3 motors white

Azzurro 803D 3-motor white electric beauty chair

Three actuators controlled by remote control or foot control—both are included. The seat moves from 64 to 90 cm, while the headrest and footrest each extend by 17 cm, providing a length of 192 cm. Two headrests and a cushion are included. Power consumption is only 50 W.

Key features

• Controlled by wired remote control or foot control, both included
• Three actuators: height, backrest and footrest
• Seat height from 64 to 90 cm
• Length up to 192 cm, headrest and footrest extensions of 17 cm each
• Footrest with retractable extension
• Two headrests included: one with a face hole and one without
• Hole cover and cushion included
• Armrests movable through 180 degrees and removable
• Power 50 W, 220–240 V supply

Foot control included, at no extra charge

A flat panel with six buttons lies on the floor and operates the chair with your foot. This solution is not available on any other Azzurro chair at this price. You can adjust the height or backrest angle without putting down your tools or touching anything with your hands—this is also more hygienic for treatments where you work in gloves. The wired remote works simultaneously, so you can choose whichever is more convenient at the moment.

Wired remote control as a second option

Eight buttons, two for each section plus a zero position. The remote does not need batteries and does not lose connection. The buttons are large and marked with arrows, so you can find them without looking.

Remote control holder on the right-hand side

The remote hangs next to the seat instead of lying on the floor. This model has one holder, located on the right-hand side—keep this in mind when planning which side of the chair to place the stool and the tool table.

Seat height from 64 to 90 cm

The lower end of the height range is 64 cm. The chair starts higher than other models, which means a step may be needed for shorter clients, but when working seated, it shortens the distance upward. The upper limit of 90 cm places the working area at the hand height of a standing person.

It extends to 192 cm

192 cm is the length with both extensions pulled out. Without the extensions, the chair is 34 cm shorter, so it does not take up unnecessary space with a shorter client. The backrest, seat and footrest form one flat surface without a threshold, so you can perform massages and body treatments in this position.

The footrest forms one flat surface when retracted

The retractable extension slides neatly under the rest of the footrest. There is no threshold or gap where calves could catch, so the surface is continuous during body treatments. In this position, the chair also takes up the least space in the treatment room.

The extension slides on a metal arm

The end of the footrest extends by 17 cm instead of merely changing its angle. For a person who is 190 cm tall, the calves are supported along their entire length and the feet do not hang over the edge. The arm locks in the selected position, so it does not slide down under the weight of the legs. Adjustment is manual and takes one second.

Extendable headrest

The headrest slides on two rods, independently of the backrest angle. For a person who is 190 cm tall, extend both rods fully and nothing hangs over the edge. For a shorter person, retract them and regain 34 cm of space in the treatment room. Adjustment is manual and takes one second.

Two headrests included

One headrest has a face opening and the other is solid—you change them depending on the treatment. This is better than using a cover because the solid headrest has no seam or indentation where the client's cheek rests. The cover is also included, so you can choose either option.

Face opening for back treatments

The second headrest has a pre-cut opening. When you position the client face down—for a back massage or neck treatment—the face rests freely and there is room for the nose. The headrest is 38 cm wide and 29 cm long.

A cover instead of replacing the headrest

If you do not want to change the module, the opening is covered by a recessed cover. The chair then looks like a regular beauty chair, with no sign of a function you are not currently using. The cover is secured by a press fit and can be removed with one hand.

Movable armrests

They can be positioned vertically, moved to the other side, or removed. When an armrest is tilted back, the side of the chair is opened, allowing the client to get in without stepping over it. After removing both armrests, the chair becomes a flat surface for back treatments. Each armrest is 53 cm long and 12 cm wide.

Seated position for facial treatments

Backrest upright, footrest lowered. For eyebrow styling, permanent makeup, or consultations, this is more comfortable than a fully reclined position. The backrest is 60 cm wide and 55 cm long, providing support for the entire length of the torso.

Semi-reclined position for most treatments

Backrest slightly reclined, footrest raised. This is the position you will use most of the time for facial treatments. The seat is 54 cm deep, so the thighs are supported and the client does not slide down when the backrest is reclined.

Mechanism concealed beneath the seat

From the back, you can see the column and cables routed along the post. Nothing protrudes to the sides or gets in the way of the stool. Power consumption is 50 W.

Stitching and synthetic leather

The stitching runs along the edges of the segments, not through the center of the seat. Nothing presses into the back during prolonged lying. Synthetic leather is resistant to moisture and selected disinfectants—an essential feature in a treatment room where the surface is wiped after every client.

Contoured backrest

The backrest is not flat—it has contoured sides that support the spine. The body does not slide sideways when the backrest is reclined, which is important during treatments where the client lies with their eyes closed for a longer period.

How much space does it take up in the treatment room

192 cm with both extensions fully extended. Without the extensions, the chair is 34 cm shorter, so when planning the space, decide whether you will use them. Remember to leave access on the right side—the remote control holder is located there.

Who is it for

For treatments during which you adjust the client's position several times during one visit. You operate the motors with the remote control, so changing the position does not interrupt your work.

Other versions of this furniture

The same model, other versions: gray.

FAQ

Do I need to purchase the foot pedal separately?
No, it is included together with the wired remote control.

How many headrests are included?
Two: one with a face opening and one full headrest. It also includes a plug and a cushion.

What height does the seat raise to?
From 64 to 90 cm.

How long does the chair extend to?
Up to 192 cm with both extensions.

How does the footrest extension work?
The tip extends 17 cm on a metal arm and locks in the selected position.

What should be used to disinfect the upholstery?
Use alcohol-free products without strong detergents. Alcohol-based products and cleaners such as Cif remove the protective layer from synthetic leather, causing the material to become dull and lose elasticity.

Technical data

Type: electric
Number of actuators: 3 (height, backrest, footrest)
Control: wired remote control and foot pedal
Upholstery color: shades of white
Upholstery material: synthetic leather
Seat filling: foam
Seat height: min. 64 cm, max. 90 cm
Length: up to 192 cm
Headrest extension: 17 cm
Footrest extension: 17 cm
Headrest: 38 × 29 cm
Backrest: 60 cm wide, 55 cm long
Seat: 54 cm
Armrests: 53 × 12 cm, movable through 180 degrees, removable
Footrest: with an extendable tip, extends 17 cm
Power: 50 W
Voltage: 220–240 V
The set includes: chair, wired remote control, foot pedal, power supply, two headrests, a plug, and a cushion
Warranty: 12 months

The product color in the photos may differ slightly from the actual color due to monitor settings and lighting conditions.