Electric Beauty Chair Azzurro 891 Gray

Electric beauty chair Azzurro 891 grey

Warm grey on a white frame. Three actuators controlled by one remote: height, backrest and legrest. The seat moves from 61 to 92 cm, and when reclined the chair is 190 cm long. The legrest extends by 15 cm.

Key features

• Three actuators: height, backrest and legrest
• Control with one wired remote
• Remote holders on both sides of the seat
• Seat height from 61 to 92 cm
• Length when reclined: 190 cm
• Legrest extension: 15 cm
• Armrests movable through 180 degrees and removable
• 100 x 58 cm base with levelling feet
• Grey synthetic leather upholstery, white frame
• Power: 160 W

Three actuators, one remote

Six buttons, two for each adjustment. The height, backrest and legrest operate independently, so you can arrange the position in any order without returning to the starting settings. The remote is wired and has a spiral cable.

Remote holder by the seat

There are holders on both sides. The remote hangs wherever you are standing and does not end up on the seat beneath the client. When working from the other side of the chair, move it to the opposite holder.

Seat height from 61 to 92 cm

31 cm of adjustment range. The lower 61 cm is the height of a standard chair, so the client can sit down without climbing up. The upper 92 cm positions the work area at the standing operator's hand height, so you do not have to bend your back during facial treatments.

Reclines to 190 cm

The backrest, seat and legrest lower into a flat position. In this position, the chair is suitable for full-body treatments, massages or tattooing. The 190 cm measurement includes the extended legrest.

Extendable legrest

The extension runs on a metal support. For a taller client, the feet no longer hang beyond the chair. For a shorter client, slide the section back in so the chair does not take up space in the treatment room that is not needed.

Legrest bends into two sections

42 cm for the calves and fourteen for the feet. The lower section tilts separately, so the feet are lower than the knees. During leg treatments, this position relieves pressure behind the client's knees.

Semi-reclined position

Backrest reclined, legrest lowered. This is the most common working position for facial and décolleté treatments. The client's back is supported, while you work from above without reaching to the side.

Flat surface without a ridge

The three sections form one continuous line. The joins do not press into the back, so the client can lie longer than fifteen minutes without changing position. This matters during tattooing and massage.

Movable armrests

They can be raised, moved or removed. A tilted armrest opens the side of the chair, so the client can get in without lifting their legs over it. When both are removed, a flat surface remains with nothing on either side.

Armrest end

The armrest support is white, while the pad itself is grey—the same colour division as on the rest of the chair. The edge is rounded, so it does not press into the forearm.

Motor and socket at the rear of the base

The power supply enters from the wall side. The socket and switch are at the rear of the housing, so the cable does not lie in the passage. The housing covers the mechanism and can be wiped clean in one movement.

Headrest adjustment knob

The headrest section tilts independently. The knob on the side of the backrest releases and locks the upper section. You can adjust it independently of the angle of the entire backrest, which determines neck positioning during facial treatments.

Upholstery stitching

A single stitch line runs along the edge. The seam follows the outline of each section instead of dividing the surface into panels. As a result, there are no places on the seat where product could collect.

Grey upholstery on a white frame

The white frame keeps the overall look light.

Who it is for

For treatments where you adjust the client's position several times during a single appointment. You operate the motors with the remote, so changing the setting does not interrupt your work.

Other versions of this furniture

The same model in another version: white.

FAQ

How many actuators does the Azzurro 891 chair have?
Three: seat height, backrest angle and legrest angle. All are controlled with one remote.

What height can the seat be raised to?
From 61 to 92 cm.

What length does the chair extend to?
Up to 190 cm.

What is the legrest extension for?
It extends the chair by 15 cm, so a taller client has supported calves instead of dangling feet.

Can the armrests be removed?
Yes. They can also be positioned vertically or moved through 180 degrees.

What should be used to disinfect the upholstery?
Products without alcohol and strong detergents. Alcohol-based products and products such as Cif remove the protective layer from synthetic leather, causing the material to become dull and lose its flexibility.

Technical data

Type: electric
Number of actuators: 3 (height, backrest, legrest)
Control: wired remote
Upholstery colour: shades of grey
Base colour: shades of white
Upholstery material: synthetic leather
Seat filling: foam
Seat height: min. 61 cm, max. 92 cm
Length when reclined: 190 cm
Backrest: 80 cm long, 62 cm wide
Seat: 53 x 62 cm, 7 cm thick
Legrest: 62 cm wide, 42 and 14 cm sections, 15 cm extension
Armrests: 55 cm plus 10 cm, movable through 180 degrees, removable
Base: 100 x 58 cm
Power: 160 W
Voltage: 220-240 V
Set includes: chair with base, wired remote, power supply
Warranty: 24 months

The product colour shown in the photographs may differ slightly from the actual colour due to monitor settings and lighting conditions.