Electric beauty chair Azzurro Lux 4 motors with rocking white

White Azzurro Lux electric beauty chair with 4 motors and tilt function

Four actuators: height, backrest, footrest, and tilt function, which tilts the entire chair body. The seat moves from 60 to 90 cm, and the chair is over 200 cm long when fully reclined. The headrest extends by 8 cm and has a 16 x 12 cm face opening covered by a plug. Everything is controlled with a wired remote.

Key features

• Four actuators: height, backrest, footrest, and tilt function
• Seat height from 60 to 90 cm
• Length when fully reclined: over 200 cm
• Headrest extends by 8 cm and has a 16 x 12 cm face opening covered by a plug
• Movable and removable armrests
• Remote holders on both sides of the seat
• Seat: 62 x 47 cm; footrest: 62 x 60 cm
• Width with armrests: 80 cm
• Power: 135 W, power supply: 220-240 V

The fourth actuator is the tilt function

It tilts the entire chair body as one plane: the head moves downward and the legs move upward. This is not backrest reclining. The backrest, seat, and footrest remain in the same position relative to one another, while the entire unit tilts at once. In the photo, this can be seen from the angle of the seat and the footrest, which is clearly higher than the headrest. This position is useful for face and neck treatments when you want the head to be lower than the torso.

The tilt function also works with the backrest bent

The tilt function works in addition to the other three adjustments; it does not replace them. You can bend the backrest, raise the footrest, and then tilt the entire chair. This allows the same working position to be set at different angles relative to the floor without changing the client's position. This is the one feature missing from the three-actuator version.

Four actuators and a wired remote

Each actuator has its own button on the remote. Movement is smooth and stops at any point within the adjustment range, so you can set the position precisely rather than in steps. The motors are concealed in the column beneath the seat; from the rear, the entire mechanism and cables running along the column are visible.

Wired remote, no batteries

The cable does not lose connection and requires no pairing. The buttons are large and marked with arrows, so you can use them without looking. With four adjustment planes, this matters: you do not have to look for the button that controls the tilt function.

Remote holders on both sides

The remote hangs in a holder beside the seat instead of lying on the floor. There is a holder on the left and right, so you can hang it on the side where you work. With a chair that moves up and down, this small detail saves you from bending down a dozen times a day.

Seat height from 60 to 90 cm

The 30 cm range covers both seated and standing work. At 60 cm, the client can sit down without climbing up; it is the height of a standard chair. At 90 cm, the face is positioned at the hand height of a person standing beside the chair.

Work standing at 90 cm

At its highest position, the chair becomes a workstation. For foot treatments, working standing is more comfortable than bending over a lowered footrest. 90 cm is enough for a 180 cm tall person to stand upright over the treatment area.

Seated position for facial treatments

For eyebrow styling, permanent makeup, or consultations, this is more comfortable than fully reclining the chair. The armrests support the client's arms, and the client does not feel as though they have been placed in a medical treatment position.

Extendable headrest

The headrest moves on two rods independently of the backrest. For a taller person, extend it fully; for a shorter person, retract it. The head always rests on the module rather than on the edge of the backrest. The headrest itself is 45 cm wide and 28 cm long.

Face opening

The opening is cut into the headrest itself rather than into an added frame. When you need to position the client face down for a back massage or neck treatment, remove the plug and the opening is ready. At 16 x 12 cm, it is large enough for the face to rest comfortably with room for the nose.

A plug instead of an exposed hole

For everyday use, the opening is covered by a recessed plug in the same color. The chair then looks like a standard beauty chair, with no sign of a function you are not currently using. The plug is push-fit, so it can be removed with one hand during treatment.

Movable and removable armrests

They fold outward and can be removed without tools when necessary. With the armrest folded away, the side of the chair is open, so the client can get in without lifting their legs over the chair. This matters for older people and those with limited mobility. Each armrest is 56 cm long and sits 26 cm above the seat.

Foam-padded seat

The 10 cm of foam provides thickness that does not collapse after a year. The 62 cm width offers extra room even for a broader build. The footrest has the same width and is 60 cm long, so the entire surface is even when fully reclined, without narrowing around the legs.

Synthetic leather and stitching

The stitching runs along the edges of the segments rather than through the middle of the seat. Nothing presses into the back during longer periods of lying down. The synthetic leather is resistant to moisture and selected disinfectants, which is essential in a treatment room where the surface is wiped after every client.

How much space it takes up in the treatment room

Over 200 cm long when fully reclined and 80 cm wide including the armrests. With the tilt function, it is worth leaving some extra space at the front and rear because the tilted body extends farther than when horizontal. The base is 110 cm long, and the extended footrest reaches approximately 20 cm beyond it.

Who it is for

For treatments where the client should lie with their legs slightly raised. The tilt function tilts the entire seat rather than just the backrest segment, so the client does not slide downward when reclined.

FAQ

How does the tilt function differ from reclining the backrest?
The tilt function tilts the entire chair body at once. The backrest changes the angle of only one segment.

To what height does the seat rise?
From 60 to 90 cm, smoothly controlled with the remote.

How long is the chair when fully reclined?
Over 200 cm.

Is the chair suitable for back treatments?
Yes. The headrest has a 16 x 12 cm face opening covered by a plug, and the armrests can be removed.

What is included?
Chair with base, wired remote, headrest, and power supply.

What should be used to disinfect the upholstery?
Alcohol-free products without strong detergents. Alcohol-based products and cleaners such as Cif remove the protective layer from synthetic leather, causing the material to become dull and lose its flexibility.

Technical specifications

Type: electric
Number of actuators: 4 (height, backrest, footrest, tilt function)
Control: wired remote
Upholstery color: shades of white
Upholstery material: synthetic leather
Seat filling: foam
Length when fully reclined: over 200 cm
Seat height: min. 60 cm, max. 90 cm
Width with armrests: 80 cm
Seat: 62 x 47 cm, thickness 10 cm
Backrest: 55 cm
Footrest: 62 x 60 cm, thickness 9 cm
Headrest: 45 x 28 cm, extension 8 cm
Face opening: 16 x 12 cm
Armrests: 56 cm long, 6.5 cm wide, 26 cm above the seat
Base length: 110 cm
Power: 135 W
Voltage: 220-240 V
Set includes: chair with base, wired remote, headrest, power supply
Warranty: 24 months

The product color shown in the photos may differ slightly from the actual color due to monitor settings and lighting conditions.