Electric massage couch Azzurro 693A 1 motor white

Azzurro 693A Electric Massage Table, 1 Motor, White

Physiotherapy table with overall dimensions of 219 x 70 cm, of which 190 cm is the actual lying surface. The height is electrically adjustable from 53–87.5 cm, a 34 cm range — the backrest and legrest are adjusted manually. The headrest is a cushion with a breathing hole. Weight capacity: 150 kg; net weight: 90 kg.

Key features

• Electric height adjustment from 53–87.5 cm, one motor
• Manually adjustable backrest and legrest
• Overall dimensions: 219 x 70 cm; lying surface: 190 cm
• Backrest raises up to 65 degrees; legrest lowers by 25 degrees
• Cushion headrest with a breathing hole
• Metal, curved base
• Maximum load: 150 kg; net weight: 90 kg
• Faux leather upholstery

Electric height adjustment from 53–87.5 cm

The 34 cm adjustment range provides broad height flexibility. The lowest position is clearly lower than a chair seat, so the patient can sit down sideways and lie down without lifting assistance. The highest position allows you to work with pressure without bending your back throughout the treatment. The height is adjusted by one motor.

Manually adjustable backrest and legrest

Only the height is electric — you adjust the segment angles by hand. Changing the angle then takes a second rather than as long as an actuator would, which can be more convenient during manual therapy. The backrest raises up to 65 degrees, while the legrest lowers 25 degrees below the tabletop level, allowing the legs to be lowered rather than merely extended.

Headrest with a breathing hole

The headrest is a separate cushion, so you can replace or clean this element on its own. The hole allows the patient to lie face down and breathe freely without twisting the neck. The cushion extends beyond the edge of the tabletop, which explains the difference between the 190 cm lying surface and the 219 cm overall dimensions that must be considered when planning space against a wall.

Metal, curved base

The frame follows an arc beneath the tabletop and rests on the floor at four points. The construction supports loads of up to 150 kg, while the table itself weighs 90 kg — enough stability to prevent the table from moving even during therapy involving strong pressure. The faux leather upholstery does not absorb oils and withstands wiping with disinfectant between patients.

Who is it for?

For physiotherapy practices where the backrest and legrest are adjusted independently. The lying surface itself is 190 cm long.

FAQ

How much space does the table take up in the practice?
The overall dimensions are 219 x 70 cm, while the lying surface itself is 190 cm long. The difference is due to the extended headrest cushion.

How low can the table be lowered?
To 53 cm, which is below the seat height of a typical chair.

Is the backrest electrically adjustable?
No. Only the height is electric. The backrest and legrest are adjusted manually — the backrest up to 65 degrees and the legrest 25 degrees below level.

What is the maximum load?
The table supports loads of up to 150 kg. The table itself weighs 90 kg.

Can the patient lie face down?
Yes, the headrest is a cushion with a breathing hole.

What should be used to disinfect the upholstery?
Alcohol-free products without strong detergents. Alcohol-based products and cleaners such as Cif remove the protective layer from the faux leather, causing the material to become dull and lose its flexibility.

Technical specifications

Colour: white
Upholstery material: faux leather
Overall dimensions: 219 x 70 cm
Lying surface: 190 cm
Height adjustment: 53–87.5 cm, electric, one motor
Backrest and legrest adjustment: manual
Backrest angle: up to 65 degrees
Legrest angle: up to 25 degrees below level
Headrest: cushion with a breathing hole
Base: metal, curved
Maximum load: 150 kg
Net weight: 90 kg
Warranty: 2 years

The product colour shown in the photographs may differ slightly from the actual colour due to monitor settings and lighting conditions.