Cosmetic chair Sillon with trays white

White Sillon beauty chair with trays

A chair without electricity, with two pull-out trays under the seat. The seat height is fixed at 67 cm, the backrest and legrest angles are adjusted with a lever, and when fully reclined, the chair measures 180 cm.

Key features

• Two 38 × 27 × 7 cm pull-out trays under the seat
• Fixed seat height of 67 cm
• Length when fully reclined: 180 cm
• Stepped backrest and legrest adjustment with a lever
• Face opening concealed beneath a 56 × 24 cm cushion
• Armrests split in the middle, movable and removable
• Metal frame with non-slip feet
• 100 × 55 cm base, without casters
• Synthetic leather in shades of white

Two pull-out trays under the seat

The tools move with the chair instead of lying on a separate table. The containers are built into the chair’s body. For manicures, brows, or tattoos, this means you do not have to turn around for tweezers—you simply pull out the drawer from under the seat. Two trays are enough to separate clean tools from used ones—and that is a difference visible during a health inspection.

Tool tray

It slides out of the rails and can be washed under running water. The trays are made of hard plastic and have no hard-to-reach corners, so disinfection takes just a moment. At 7 cm deep, they hold bottles of products standing upright, not just small items laid flat. The rails are included and are installed together with the chair.

Fixed height of 67 cm

The chair does not raise—the seat always remains at the same level. The lack of adjustment is a deliberate compromise: there is no actuator, pump, or cable, so there is nothing to break. At 67 cm, its height is suited to working while seated on a stool set at 50–60 cm. Before choosing this model, check whether your workstation operates at one height throughout the day.

You adjust the angles with a lever

One handle operates the backrest, and the other operates the legrest. Release the lever, position the segment by hand, and let go—the mechanism locks itself. There is no need to reach for a remote or wait for the actuator to reach the end of its range, so changing position takes just a second.

The adjustment is stepped, not smooth

The toothed rack sets positions every few centimetres. This differs from hydraulic chairs, where the angle stops exactly where you want it. Here, you choose one of the preset positions—in return, the mechanism is simple, with nothing that will start to sag under weight over time.

Metal hinges at the pivot points

The segments pivot on metal, not plastic. These are the points that move with every position change and wear out first in cheaper chairs. Here, the entire structure is supported by a metal frame, and the chair stands on non-slip feet instead of wheels, so it does not move across the floor when the client stands up.

Unfolds to 180 cm

The backrest, seat and footrest form a single flat surface. The chair becomes a treatment surface for lying-down procedures, so it can also be used for body treatments, physiotherapy and tattooing. At 180 cm, it accommodates most people, and the transitions between the segments are flat.

Footrest

The 61 cm length supports the calves along their entire length. The segment lowers independently of the backrest, so when working on the feet, you can lower it and sit in front of the chair. The backrest is 70 cm long, while the seat measures 60 × 51 cm with 10 cm-thick foam.

Headrest cushion

The contoured cushion is included. Its 56 cm width supports the head even when it is turned to the side. The cover is made of the same material as the rest of the chair, so it can be cleaned in the same way.

Face opening beneath the cushion

Removing the headrest cushion reveals a ready-made face opening. This turns the chair into a workstation for treatments performed on the back, such as massage of the neck and shoulders. In everyday use, the cushion covers the opening and the chair looks like a standard beauty chair. The armrests can also be removed so the arms can hang freely.

Stitching runs along the edges

The stitching is set away from the center of the seat and backrest. Nothing presses into the back during longer periods of reclining because the upholstery is smooth where the spine rests. The contoured stitching also helps the seat retain its shape.

Seat stitching

A double seam around the perimeter keeps the foam in place. As a result, the seat does not spread sideways after several months of daily use and retains its contoured shape, which supports the hips.

Synthetic leather and foam

The upholstery is moisture-resistant and easy to clean. This is essential in a treatment room, where the surface is wiped down after every client. The texture has a subtle grain, so the body does not slide when the backrest is reclined.

How much space does it take up in the salon?

The base is 100 x 55 cm, while the frame extends to 130 cm from foot to foot. When reclined, the chair is 180 cm long, so most of the additional space is needed in front. Important when planning the workstation: the chair stands on feet, not casters, so once positioned it stays in place—and the trays slide out to the side, which must also be taken into account.

Who is it for?

For a workstation where tools should be within reach without a separate table. The trays slide out from the sides of the chair and can be removed for disinfection together with their contents.

Other versions of this furniture

The same model, other versions: black.

FAQ

Does the chair have height adjustment?
No. The seat is fixed at a height of 67 cm. Only the backrest and footrest angles can be adjusted.

What are the tray dimensions?
38 by 27 cm, with a depth of 7 cm. There are two.

Can the trays be removed for cleaning?
Yes, they slide out of the runners and are made of rigid plastic.

Is the chair suitable for back treatments?
Yes. There is a face opening under the headrest cushion, and the armrests can be removed.

What is included in the set?
Seat with backrest and footrest, two trays, tray runners, a complete set of armrests, face-hole cushion, base components, and an assembly kit.

What should be used to disinfect the upholstery?
Use alcohol-free products without harsh detergents. Alcohol-based products and Cif-type cleaners remove the protective layer from eco-leather, causing the material to become dull and lose its elasticity.

Technical data

Type: non-powered, manual adjustment
Seat height: 67 cm, fixed
Length when fully reclined: 180 cm
Base: 100 x 55 cm, frame 130 cm
Trays: 2 pieces, 38 x 27 x 7 cm, on runners
Headrest cushion: 56 x 24 cm
Backrest: 70 cm
Seat: 60 x 51 cm, thickness 10 cm
Footrest: 60 x 61 cm
Armrests: 40 cm, split in the middle, movable, removable
Overall width with armrests: 85 cm
Adjustment: stepped, with a lever
Frame: metal, with non-slip feet, no casters
Upholstery color: shades of white
Base color: shades of white
Upholstery material: synthetic leather
Filling: foam
The set includes: seat with backrest and footrest, two trays, runners, a complete set of armrests, face-hole cushion, base components, and an assembly kit
Warranty: 12 months

The product color in the photos may differ slightly from the actual color due to monitor settings and lighting conditions.