Beauty chair Sillon with trays black

Black Sillon beauty chair with trays

Chair without electricity, with two pull-out trays under the seat. The seat height is fixed at 67 cm, the backrest and footrest angles are adjusted with a lever, and when fully reclined, the chair measures 180 cm. Upholstery and frame in shades of black.

Key features

• Two 38 × 27 × 7 cm pull-out trays under the seat
• Fixed seat height: 67 cm
• Length when fully reclined: 180 cm
• Stepped adjustment of the backrest and footrest with a lever
• Face opening concealed beneath a 56 × 24 cm cushion
• Armrests split in the middle, movable and removable
• Metal frame with anti-slip feet
• Base: 100 × 55 cm, without casters
• Upholstery and frame in shades of black

Two pull-out trays under the seat

The tools move with the chair instead of lying on a separate table. The containers are built into the chair’s body. For manicures, brow treatments, or tattooing, this means you do not have to turn around for tweezers—you simply pull out the drawer from under the seat. Two trays are enough to separate clean tools from used ones—a difference that is noticeable during a sanitary inspection.

Tool tray

It slides out of the runners and can be washed under running water. The trays are made of hard plastic, with no hard-to-reach corners, so disinfection takes just a moment. The 7 cm depth accommodates bottles of products standing upright, not just small items laid flat. The runners are included and are installed together with the chair.

Fixed height of 67 cm

The chair does not rise—the seat is always at the same height. The lack of adjustment is a deliberate compromise: there is no actuator, pump, or hose, so there is also nothing to break. At 67 cm, the height is suited to working while seated on a stool set at 50–60 cm. Before choosing this model, check whether your workstation operates at one height throughout the day.

Set the angles gradually with the lever

The toothed rack sets positions every few centimeters. Release the lever, adjust the segment by hand, and let go—the mechanism locks itself. This is the difference compared with hydraulic chairs, where the angle can stop at any point: here, you choose one of the preset positions, but the mechanism is simple and has nothing that will start to sag under the weight over time.

Metal hinges at the pivot points

The segments rotate on metal, not plastic. These are the points that bear the load with every position change and wear out first in cheaper chairs. Here, the entire construction rests on a metal frame, and the chair stands on anti-slip feet instead of casters—it does not roll across the floor when the client gets up.

Unfolds to 180 cm

The backrest, seat, and footrest form a single flat surface. The chair becomes a surface for treatments performed while lying down, so it can also be used for body treatments, physiotherapy, and tattooing. Its 180 cm length accommodates most people, and the transitions between segments are flat.

Footrest

Its 61 cm length supports the calves along their entire length. The segment lowers independently of the backrest, so when working on the feet, you can lower it and sit in front of the chair. The backrest is 70 cm, while the seat measures 60 × 51 cm with 10 cm-thick foam.

Headrest cushion

The cushion is contoured and included in the set. Its 56 cm width supports the head even when it is turned to the side. The cover is made of the same material as the rest of the chair, so it is cleaned in the same way.

Face opening under the cushion

When the cushion is removed, a ready-made face opening is revealed in the headrest. This turns the chair into a workstation for treatments performed while lying on the back—massages of the back, neck, and shoulders. On a daily basis, the cushion covers the opening and the chair looks like a regular cosmetic chair. The armrests can also be removed so the arms can hang freely.

Armrests split in the middle

Each armrest consists of two parts connected by a joint. This allows them to move together with the backrest: when you recline them, the armrest does not stick out at an angle but follows the line of the body. Each one is 40 cm long, and the outer width is 85 cm. They can be removed without tools if needed.

The stitching runs along the edges

The stitching is set away from the center of the seat and backrest. Nothing presses into the back during longer periods of lying down because the upholstery is smooth where the spine rests. The contoured stitching also maintains the shape of the seat.

Synthetic leather and foam

The upholstery is moisture-resistant and easy to clean. This is essential in a treatment room where the surface is wiped after every client. The material has a delicate grain, so the body does not slide when the backrest is reclined.

Black is less forgiving than white

On dark upholstery, watermarks and residue are visible, but discoloration is not. This is a practical difference when choosing a color: oil-based products, henna, and eyebrow dyes leave marks on light leather that cannot be removed, while they are invisible on black. Conversely, dried drops of water and disinfectant stand out precisely on black.

Intermediate position for facial treatments

There are several intermediate settings between the seated and flat positions. In practice, these are where most of the time is spent: the client is reclined, but their head is higher than their legs, so products do not run into their hair. The ratchet mechanism holds this position securely throughout the treatment.

How much space does it take up in a treatment room?

The base measures 100 x 55 cm, while the frame extends to 130 cm from foot to foot. When reclined, the chair is 180 cm long, so most of the extra space is needed in front. This is important when planning the workstation: the chair stands on feet, not wheels, so once positioned it stays in place—and the trays slide out to the side, which must also be taken into account.

Who it is for

For a workstation where tools need to be within reach without a separate table. The trays slide out from the sides of the chair and can be removed for disinfection together with their contents.

Other versions of this furniture

The same model, other versions: white.

FAQ

Does the chair raise to a higher position?
No. The seat is at a fixed height of 67 cm. Only the backrest and footrest angles can be adjusted.

What are the dimensions of the trays?
38 by 27 cm, with a depth of 7 cm. There are two.

Can the trays be removed for washing?
Yes, they slide out of the runners and are made of hard plastic.

Is the chair suitable for back treatments?
Yes. There is a face hole under the headrest cushion, and the armrests can be removed.

What is included in the set?
Seat with backrest and footrest, two trays, tray runners, a complete set of armrests, a face-hole cushion, base components and an assembly kit.

What should be used to disinfect the upholstery?
Use alcohol-free products without strong detergents. Alcohol-based products and products such as Cif remove the protective layer from synthetic leather, causing the material to become dull and lose its elasticity.

Technical data

Type: non-powered, manual adjustment
Seat height: 67 cm, fixed
Length when fully reclined: 180 cm
Base: 100 x 55 cm, frame 130 cm
Trays: 2, 38 x 27 x 7 cm, on runners
Headrest cushion: 56 x 24 cm
Backrest: 70 cm
Seat: 60 x 51 cm, 10 cm thick
Footrest: 60 x 61 cm
Armrests: 40 cm, split in the middle, movable, removable
Overall width with armrests: 85 cm
Adjustment: incremental, with a lever
Frame: metal, non-slip feet, no wheels
Upholstery colour: shades of black
Base colour: shades of black
Upholstery material: synthetic leather
Filling: foam
The set includes: seat with backrest and footrest, two trays, runners, a complete set of armrests, a face-hole cushion, base components, assembly kit
Warranty: 12 months

The product colour in the photos may differ slightly from the actual colour due to monitor settings and lighting conditions.