Pro Ink 210DH hydraulic tattoo chair with cradle, black

Black Pro Ink 210DH hydraulic tattoo chair with cradle function

No electricity—the hydraulic pump with a foot pedal raises the seat from 60 to 77 cm. The chair rotates a full 360 degrees, has a cradle function, and features a face opening in the backrest. When unfolded, it measures approximately 180 cm. It also includes a holder for towels, film, and roll underlays.

Key features

• Hydraulic actuator, pump with a foot pedal
• No power supply or cable in the studio
• Seat height from 60 to 77 cm
• Full rotation around the axis, lockable actuator
• Cradle function
• Backrest and footrest on separate levers
• Face opening in the backrest, covered with a cushion
• Removable and adjustable armrests
• Holder for towels, film, and roll underlays
• Black synthetic leather upholstery, black frame

Hydraulics with a foot pedal

Raise it with your foot while your hands are occupied with the machine. During a session, both hands are occupied. Adjust the height with your foot, without putting down your tool or removing your glove. There is also no power adapter or cable trailing across the studio.

Seat height from 60 to 77 cm

17 cm of adjustment. A tattoo session lasts for hours, so an unsuitable height affects the spine. The gas lift has a lock, so the setting does not shift under the client's weight during work.

The cradle function tilts the entire frame

The seat and backrest move together. When tattooing the ribs, side of the torso, or back, the body needs to be positioned at an angle, not simply reclined. The cradle function provides this tilt without the client sliding off the seat.

Backrest and footrest on separate levers

Two levers beside the seat. Adjust the angles independently: you can lay the footrest flat with the backrest raised or lower it steeply downward. No steps or notches—lock it exactly where you want it.

Reclines to approximately 180 cm

The backrest, seat, and footrest form one line. Fully reclined, the chair becomes a lounger—sessions on the back or the entire leg do not require a separate table. The sections meet without a step, so the edge does not leave a pressure mark after several hours.

Flat and low

Lowest setting with the chair fully reclined. For a back tattoo, the client gets onto the chair while it is lowered, and only then do you raise it to working height with the pedal. This matters for clients with limited mobility.

Semi-reclined position

Backrest reclined, footrest raised. The most common position for tattooing the arm, forearm, and thigh. The client's back is supported throughout the session, while you work on them from the side.

Footrest lowered steeply downward

A separate angle independent of the backrest. When tattooing the calf or foot, the leg lowers and extends beyond the chair's outline, so you sit in front of it instead of reaching over the knee.

Face opening in the backrest

Cut into the backrest itself, not into an added headrest. During a back session, the client places their face in the opening and breathes normally instead of twisting their neck. Nothing needs to be added or screwed on.

Through-opening

It is a through-opening, not a recess. The face does not rest against the bottom, so after several hours there are no marks on the forehead or cheekbones. It is a difference the client notices only during a long session.

Cushion covers the opening

Place it on top when the opening is not needed. During a forearm session, the cushion closes the opening and supports the head. It is included, so there is no need to purchase it separately.

Removable armrests

They run on chromed pins. You set the armrest at the height you are working at, or remove it completely when it gets in the way. The surface supports the entire forearm, not just the hand.

Front view

Both armrests are mounted on pins at the sides of the seat. The chair is narrow for its length, so it fits in a typical studio workstation without taking space from the neighboring station. The roll holder hangs beneath the footrest.

Holder for towels, film, and backing sheets

Chromed bar beneath the footrest. The roll hangs where you need it instead of lying on the work surface beside you. During a session where you change the backing several times, it saves a lot of movement.

Contoured seat

Raised edges and a recessed center. The shape keeps the pelvis in place, so the client does not slide sideways when the chair is tilted. The foam is firm and does not deform after a session lasting several hours.

Stitching and synthetic leather

Black does not show ink stains. The upholstery does not absorb water, and after each session you can wipe it with an alcohol-free product. The frame is also black, so the chair looks like a single unit.

For whom

For a tattoo studio where a session lasts several hours and the position is changed during the session. You can adjust the backrest and footrest independently, so you can change access to the tattooed area without asking the client to stand up.

FAQ

Does the chair require a power supply?
No. It is raised by a hydraulic pump operated with a foot pedal.

What height can the seat be raised to?
From 60 to 77 cm.

What length does the chair extend to?
Up to approximately 180 cm.

Does the chair rotate?
Yes, a full 360 degrees. The cylinder has a lock that maintains the selected position.

What is included in the set?
A seat with backrest and footrest, a complete set of armrests, a cushion for the opening, and a base with a hydraulic pump.

What should be used to disinfect the upholstery?
Use alcohol-free products without strong detergents. Alcohol-based products and products such as Cif remove the protective layer from eco-leather, causing the material to become dull and lose its flexibility.

Technical specifications

Type: hydraulic
Number of cylinders: 1
Drive: hydraulic pump with foot pedal, cylinder with lock
Upholstery color: shades of black
Frame color: shades of black
Upholstery material: synthetic leather
Seat filling: foam
Seat height: min. 60 cm, max. 77 cm
Length when unfolded: approximately 180 cm
Backrest and footrest adjustment: manual, separate levers
Face opening: in the backrest, covered with a cushion
Armrests: removable, adjustable
Rotation: full, 360 degrees
Additional equipment: holder for towels, foil, and rolls of protective sheets
The set includes: a seat with backrest and footrest, a complete set of armrests, a cushion for the opening, and a base with a hydraulic pump
Warranty: 12 months

The product color shown in the photos may vary slightly from the actual color due to monitor settings and lighting conditions.